Welcome to the Yamaha Star Bolt Motorcycle Forum

Why join our motorcycle community?

  • Membership is free and easy
  • Get technical support and information for your Yamaha Star Bolt motorcycle or search for information before buying
  • Use the member map to find riders near you
  • Participate in our monthly virtual bike show (or at least vote)
  • Get rid of these annoying boxes asking you to register  ;D

More importantly, make new friends!!

Author Topic: intake dimensions  (Read 306 times)

0 Members and 1 Guest are viewing this topic.

Offline VIKEN

  • Jr. Member
  • **
  • Posts: 53
intake dimensions
« on: May 19, 2020, 11:55:11 pm »
Somebody had posted this somewhere a while back and I can't seem to find it... and I was wondering if I could see the rest of it... some measurements are cut off from the photo. Thanks!




Online electrosloth

  • Newbie
  • *
  • Posts: 40
Re: intake dimensions
« Reply #1 on: May 20, 2020, 12:12:33 pm »
It looks like each graph unit is 5.0mm.  You could potentially print it out at 1:1 scale and then check with a ruler, or eyeball it on the picture.
2014 R-Spec in flat grey

Offline RudeBoltin

  • Hero Member
  • *****
  • Posts: 1553
Re: intake dimensions
« Reply #2 on: May 20, 2020, 03:49:34 pm »
Somebody had posted this somewhere a while back and I can't seem to find it... and I was wondering if I could see the rest of it... some measurements are cut off from the photo. Thanks!



Here is the original thread.
https://www.yamahastarbolt.com/mods-and-accessories/diy-air-filter-what-have-i-started/
There is a zip file in there with the STL file that has all the measurements. I had a friend print one out for me. It looks good, but I haven't gotten around to putting it on yet. Need to find a filter and come up with a cover.
Be safe and Bolt on.

  • Advertisement

Offline VIKEN

  • Jr. Member
  • **
  • Posts: 53
Re: intake dimensions
« Reply #3 on: June 02, 2020, 09:30:01 pm »
Thanks all