Welcome to the Yamaha Star Bolt Motorcycle Forum

Why join our motorcycle community?

  • Membership is free and easy
  • Get technical support and information for your Yamaha Star Bolt motorcycle or search for information before buying
  • Use the member map to find riders near you
  • Participate in our monthly virtual bike show (or at least vote)
  • Get rid of these annoying boxes asking you to register  ;D

More importantly, make new friends!!

Author Topic: Centerstand  (Read 1743 times)

0 Members and 1 Guest are viewing this topic.

Offline lunkhead

  • Hero Member
  • *****
  • Posts: 1673
Centerstand
« on: January 26, 2021, 04:13:10 am »
Ran across this centerstand from T-Rex made specifically for the Bolt.

https://www.t-rex-racing.com/2013-2020-Yamaha-Bolt-Center-Stand-p/n79-13cs.htm

Installation video:
https://m.youtube.com/watch?v=2vjUflZ0674
« Last Edit: January 31, 2021, 03:04:57 pm by lunkhead »


C-SPƎC

Offline GermanRider21

  • Newbie
  • *
  • Posts: 2
Re: Centerstand
« Reply #1 on: January 26, 2021, 08:24:32 am »
Wow that's convenient! 👍😉👍

Sent from my SM-A115U using Tapatalk


Offline GermanRider21

  • Newbie
  • *
  • Posts: 2
Re: Centerstand
« Reply #2 on: January 26, 2021, 08:32:10 am »
https://www.t-rex-racing.com/2013-2020-Yamaha-Bolt-R-Spec-Floor-Board-p/n79-13fb.htm

Look at those floorboards too! 👍😉👍

Sent from my SM-A115U using Tapatalk


  • Advertisement

Offline Redbeard89

  • Jr. Member
  • **
  • Posts: 51
Re: Centerstand
« Reply #3 on: January 27, 2021, 07:20:02 am »
https://www.t-rex-racing.com/2013-2020-Yamaha-Bolt-R-Spec-Floor-Board-p/n79-13fb.htm

Look at those floorboards too! 👍😉👍

Sent from my SM-A115U using Tapatalk

Looks like they added a heel shifter too? Couldn't find that part on the site tho.
Bolts n' Hoes

Offline ShakerNorm

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5427
Re: Centerstand
« Reply #4 on: May 27, 2021, 07:47:46 am »
I SOOOOO miss having a Centerstand!  My old XS has one, and it makes things SO Convenient - like changing tires, oil changes, and so many other chores!
NOBODY hates winter more than a Canadian Biker!

Offline E

  • Full Member
  • ***
  • Posts: 183
Re: Centerstand
« Reply #5 on: May 28, 2021, 03:01:04 pm »
https://www.t-rex-racing.com/2013-2020-Yamaha-Bolt-R-Spec-Floor-Board-p/n79-13fb.htm

Look at those floorboards too! 👍😉👍

Sent from my SM-A115U using Tapatalk
kuryakyn mini-floor boards - i installed on my BOLT last month (approx $125 plus $35 for required serrated adapter)
E - 1st John 4:10

Offline Interstellar50

  • Newbie
  • *
  • Posts: 2
Re: Centerstand
« Reply #6 on: July 07, 2021, 11:29:44 pm »
I must say that this is very impressive.
I love Centerstand   :)

Offline Yamajamer

  • Newbie
  • *
  • Posts: 16
Re: Centerstand
« Reply #7 on: July 17, 2021, 07:58:16 pm »
Anyone install center stand yet? Was installation easy/hard?

Offline BruceR

  • Newbie
  • *
  • Posts: 3
Re: Centerstand
« Reply #8 on: August 18, 2021, 01:22:11 pm »
I installed the T-rex center stand last week, I'm happy with the construction, looks very well built. The install was not too difficult, I did have to grind the two spacers on the right side (.020-.030), it was just a little too tight. I have the Vance and Hines twin slash pipes and the stop for up position is tight to the underside of the pipes. I had to loosen some of the clamps and mounting bolts to get it to work. I love having a stand for working on the bike. The only down side I have found is when leaning to the right, the foot of the stand scrapes before the peg does. Since it's not spring loaded I worry about it catching.

Offline bw03

  • Newbie
  • *
  • Posts: 46
Re: Centerstand
« Reply #9 on: August 23, 2021, 05:10:48 pm »
I installed the T-rex center stand last week, I'm happy with the construction, looks very well built. The install was not too difficult, I did have to grind the two spacers on the right side (.020-.030), it was just a little too tight. I have the Vance and Hines twin slash pipes and the stop for up position is tight to the underside of the pipes. I had to loosen some of the clamps and mounting bolts to get it to work. I love having a stand for working on the bike. The only down side I have found is when leaning to the right, the foot of the stand scrapes before the peg does. Since it's not spring loaded I worry about it catching.

Thanks for the update.  I had one on order but cancelled it.  The scraping on turns definitely made me change my mind.  I scrape enough as it is.  Don't need to make my lean angle any less.

Offline ShakerNorm

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5427
Re: Centerstand
« Reply #10 on: November 15, 2021, 07:55:06 am »
I wonder if it could be set up so that it can be (relatively) easily removeable? 
It could be used for winter storage or maintenance, and removed for normal everyday riding.
NOBODY hates winter more than a Canadian Biker!